Seetek

  • Skip to content
  • Jump to main navigation and login

Nav view search

Navigation

Search

You are here: Home Technology SMPS Article

Main Menu

  • Home
  • Technology
    • NCORE
    • UcD
    • SMPS
    • DSP
  • Quality
  • Contact Us

Login Form

  • Forgot your password?
  • Forgot your username?

DSP

Details
Category: Article
Published: Wednesday, 01 July 2020 03:13
Written by Administrator
Hits: 1365

HYPEX DSP SOLUTIONS

At the moment we are updating our range of OEM DSP modules. These modules are planned to be released Q2 2017.

Hypex Electronics has many years of experience in DSP solutions. We have developed our own filter design software which this can be utilized to configure our range of DSP modules and plate amplifiers. Furthermore, we offer a high-end Digital Loudspeaker Control Platform (DLCP) for DIY applications.

The “DLCP” is a complete hardware/firmware platform for digitally filtered (6 channels) and corrected active multiway loudspeakers. Digital response correction allows significant extra degrees of freedom in the acoustic design of a loudspeaker. Driver parameters can be selected for best efficiency and distortion instead of electrical damping, and the cabinet can now be fully optimized for radiation pattern.

SMPS

Details
Category: Article
Published: Wednesday, 01 July 2020 03:12
Written by Administrator
Hits: 1309

SWITCH MODE POWER SUPPLY (SMPS)

The SMPS is a high efficiency, switch mode power supply specifically designed to be used in combination with our modules.

Key features include high efficiency over the entire load range, extremely small form factor, low weight and very low radiated and conducted EMI.

The SMPS also features an upgraded over current protection which in case of temporary overload simply reduces the output voltage, only when the overload condition remains for a longer time the supply will enter hiccup mode until the overload condition disappears. This feature combined with large electrolytic buffer capacitors leads to the capability of delivering high dynamic headroom power to the connected amplifier.



A new feature in our new power supplies is the automatic input voltage selector which accommodates quasi universal mains capabilities. An auxiliary isolated supply to power possible user applications is also included.

The supply is triggered for normal operation or latched off in case of a critical fault via in built-in actuators. The SMPS is optimized from the first phase of design to final implementation to realize the low EMI signature required of the most demanding audio applications.

NCORE

Details
Category: Article
Published: Wednesday, 01 July 2020 03:07
Written by Administrator
Hits: 1699

HYPEX NCORE® TECHNOLOGY

Ncore® is the first Class-D amplifier not just to nudge the best linear amplifiers, but to surpass them in every aspect relevant to sound quality. If you want the ultimate in clarity, resolution and musicality, there is no longer a reason to trade efficiency or compactness.

NCore technology combines the stability of UcD with improved load-independence, lower distortion and lower output impedance.


 Amplifiers using all four of the above will be Ncore. Amplifiers using only the first three will be sold under the UcD brand even though their internals no longer resemble that of the well-known 2001 circuit


 

UcD

Details
Category: Article
Published: Wednesday, 01 July 2020 03:09
Written by Administrator
Hits: 1461

HYPEX UNIVERSAL CLASS D

Hypex UcD amplifier modules are self-contained high-performance Class-D amplifiers intended for a wide range of audio applications, ranging from ‘public address’ systems to ultrahigh-fidelity replay systems for studio and home use.

Chief distinguishing features are flat frequency response irrespective of load impedance, nearly frequency-independent distortion behaviour and very low radiated and conducted EMI. Control is based on a phase-shift controlled self-oscillating loop taking feedback only at the speaker output.


2003 saw the start of a migration of all products to Class-D. For this, a licence deal was closed with Philips for the “Universal Class D” circuit. Realising the market potential of the circuit, Hypex decided not only to use the technology in completed subassemblies, but also to sell bare amplifier modules to the open market. The UcD180 and UcD400 modules have quickly established themselves as the new standard, both in terms of measured and subjective performance.

Contact Us

Details
Category: Article
Published: Thursday, 25 June 2020 09:44
Written by Administrator
Hits: 2929

Seetek EMS Sdn Bhd (102256-V)

No 1757, Lorong Industri 3,

Taman Nibong Tebal,

14300 Nibong Tebal

Pulau Pinang,

Malaysia

 

T: +60 4 593 0055

E: This email address is being protected from spambots. You need JavaScript enabled to view it.

W: www.seetek.com.my


 Our location:

 

More Articles ...

  1. Quality
  2. Technology
  3. Home